Welcome to Digital Shop

Merupakan toko kamera digital, peralatan fotografi dan gadgets berlokasi di Jakarta yang melayani secara online dan dapat mengirim ke seluruh wilayah Indonesia (menggunakan jasa TIKIJNE berasuransi www.jne.co.id ).

(View Map)
HDSLR System » Accessories » G-STABILIZER 2 Axis Gyro INTELLIGENT Steady System Stablizer Dslr
G-STABILIZER 2 Axis Gyro INTELLIGENT Steady System Stablizer Dslr
G-STABILIZER 2 Axis Gyro INTELLIGENT Steady System Stablizer Dslr
Red Star
Out of stock
The two axis G-stabilizer is a new generation of high strength,high efficiency shooting accessory.
Description
  • Ready to run, everything is assembled
  • Quiet, and easy to lance DSLR sized cameras
  • Looks simple, and is simple to use
  • Works in different modes, such as Follow mode in Pitch, YAW Lock mode in Roll
  • Brushless motor, max driving up to 2.5kg
  • High precision control, the control accuracy is plus/minus .05 degrees
  • Intelligent steady system, maintains the image position

The product has been tested and adjusted professionally beforeleaving the factory. Most of the DSLR and BMCC cameras can be used directly without parameter settings, simply adjust the balance of the machines.

1. Install the camera in the quick release plate of the G-stabilizerand lock it tight.
2. Observe the heeling condition of the camera; adjust the quickrelease plate until the camera can reach to a balanced state naturally.
3. Insert the battery, open the switch, holding the stabilizer in 5 to 8 seconds until the gyro stabilizer finish its self- inspection, andthen working normally that means it can be used.

Important: In order to use the stabilizer safely and effectively, please operate strictly according to the operation manual for obtaining the optimal effectand safe performance.It is forbidden to adjust the original parameters. Trying to adjust theoriginal parameters may cause the equipment to not work properly.

Battery protection: The original battery of the stabilizer should keep working one hour. Overcharge or over discharge might cause battery damage. 

  • Max load weight: 2.5KG (CAMERA body + lens)
  • Support camera mode: DSLR Camera (such asCanon 5D2, 5D3, Nikon D800 and so on); BMCC etc.
  • Support lens: focal length ≤100mm, recommend usingwide-angle lens, such as 16-35mm, 17-40mm
  • Power supply time: 1 hour (with original battery)
  • Size: 41*30*26cm
  • Weight: 1.9KG
  • The size of the inside camera frame: ≤ 180mm
WHAT YOU WILL RECEIVE:
 
1 each Carbon fiber gimbal pre assembled.
2 each Brushless Motors GMB5208-180T
1 each Battery Charger
1 each Battery
2 each Handles