Direct support for RF-603, RF602 transmitters, GN58, 105mm
Large LCD panel, PC port supported
Power zoom function covered focal length range from 24 to 105mm
High speed of charging recycle only 3 seconds in charging after full power output
The major upgraded for YN-560 III is that it comes with RF-602 and RF-603 2.4G compatible radio receivers built-in to the unit, which means you can use YN-560 III as a receiver off camera, and it can be used together with RF-602 / RF-603 transmitters on the camera,
pressing the button of transmitter or the shutter release button of camera, YN-560 III can be fired.
You can not only use YN-560 III as a flash, but also a flash receiver, you can use those two functions synchronously.
Functions :
a, Using RF-602/RF-603 2.4G ultra-long-range wireless flash system
Adopted by global users trust the allways RF-602/RF-603 wireless flash system. Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above.
b, Full support for RF-603, RF-602 wireless transmitter
Same YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily.
c, Large-size LCD display
The YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use.
d, Equipped with power zoom function
ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements
e, GN58 @ ISO100, 105mm
High index 2.4G radio flash support M / Multi mode.
f, Various trigger synchronization, flexible
The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger.
g, Equipped with an external power outlet
The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed, you can buy SF-18 Canon version to fit for it.
h, Equipped with a PC sync port
The YN560-III equipped with a standard PC synchronous port, using a PC sync cord flash sync flash.
i, Voice prompt system
Open to the voice prompts, the flash voice prompts work state, so you can focus on the creative process (Note: the sound can be turned off).
j, a speeding call back system
Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience,
only 4 to 5 seconds; You can also use external charging box call back again accelerated.
k, Advanced Options settings
The YN560-III with Advanced Options settings according to their needs, you can customize the flash function.
l, automatically save set
The YN560-III can automatically save your current operating settings, to facilitate the next time you boot.
m, metal texture hot shoe interface, rugged, reliable, and to the force.
Suit for :
ANY Standard Hot Shoe DSLR Camera, such as Canon, Nikon, Pentax, Olympus, and so on
1 x YN-560 III WITH METAL HOT SHOE
1 x Mini Stand
1 x Protecting case ( Black ) with Wrapped Air Bubble Sheet
1 x Manual in English and Chinese
1 x Original Box
